If you are facing the problem where you text is not scaling properly and the animation is not coming smooth then in this kind of situation you have to use something which can find the nearest neighbor and convert the values in accordance with this nearest neighbor. If you are using Silverlight then you can do this very easily by typing just one line of code. For Silverlight 2 you have to type RenderOptions.TextRenderingMode = “RenderForAnimation” For Silverlight 3 you have to type TextOptions.TextHintingMode = "Animation" Both of these ensure that the text animation is proper, if you don’t use these properties then you will find sometime when you are applying some scaling or any other rendering transformation on any container which also contains some text element then this text element inside the container will also scale. I will give main emphasis on Silverlight 3 property i.e TextOptions.TextHintingMode This property takes one of two possible values: Animated or Fixed. “Animated optimizes for animation by using a more efficient, but less visually precise, smoothing algorithm. Text is still readable and the loss of precision is not that severe.” Fixed uses an algorithm that is optimized for visually precise text smoothing, but can lead to performance issues. For example, when animations are applied to properties of a text element, in particular FontSize, you might see jitters. When transforms, positioning, or projections are applied to text elements, you might see performance issues. Fixed is the default. You can apply this property to a layout container and the setting will apply to any text element within that container. However, in general, you should apply this property directly to a text element, such as a TextBlock, TextBox, or Glyphs, where the animations applied will only affect the text. Happy Programming!!!!!!!!!!!!!!!
Setting alerts in MOSS 2007 is very easy just go to any list or library right click on Actions Tab and the last option available is the Alert Me feature. Configuring these alerts is very simple and is a child’s play but customizing the alert emails which are sent and sending list specific email alerts and stuffs like this are little bit tricky. Don’t worry here we are not discussing those horrifying issues but here we are simply going to discuss on how to delete the alerts which user has set on a particular list. There is a very simple process to do this you don’t need to write code for that but i am sharing this with you as for the novice programmer it’s a tedious task to find actually where to go to delete these alerts.
Stay tuned for more articles on Sharepoint (MOSS 2007) Happy Programming!!!!!!!!!!!!!!!!!!!
Many times we need to change the default timer settings either by increasing the default time or by decreasing the default time of the timer jobs for a particular sharepoint site. Particularly if you want to send an email as soon as an action is performed within the sharepoint, in such a scenario you will need to decrease the default timing of the timer job. There are two commands by which you can achieve this very easily:-
That’s all you need to do to adjust the default timer job timing delays. Happy Programming!!!!!!!!!!!!!!!!!
Hi readers, i am pleased to announce that Smallworkarounds has been launched for the mobile platform using Mobify.Me service. You can find the mobile version of Smallworkarounds at www.smallworkarounds.mobify.me Now you can view your favourite new articles on your mobile set.There will be few more upgrades in future for this mobile site. I came across mobify.me through Woork and as soon as i used it, i started liking this service. I highly recommend you to go through this article on Woork to follow the steps to mobify your website.
O3D is an open-source web API for creating rich, interactive 3D applications in the browser. This API is shared at an early stage as part of a conversation with the broader developer community about establishing an open web standard for 3D graphics. The latest release is O3D Release 0.1.40.1 O3D is available in Internet Explorer, Firefox, Chrome, and Safari and works on any Linux, Mac, and Windows computer that meets the minimum hardware requirements. You can watch the sample here http://o3d.googlecode.com/svn/trunk/samples/beachdemo/beachdemo.html You can download O3D from http://code.google.com/apis/o3d/
There are times when you need to edit the user profiles and relate some meaningful data other then the default data which the user brings from its active directory or standalone profile. For this task you need to know where exactly you can modify the user profile. This article will tell you one possible way of modifying the user profile and relating an email address to the user. 1.Open the Central Administration and from the central administration select the Shared Service Provider link. 2.In the shared service provider open the User Profiles and properties link. 3.After clicking the User Profile link you will be redirected to a page where you will find profile and import settings.On this page click on the view user profiles link, clicking on this link will take you to a page where you will find all the details related to the user, you can edit and save changes inside many of the given user related properties. 4. View User Profile will redirect you to a page where you can find all the users now you can click on any of them and as soon as you click the dropdown around them you will find options saying Edit,Delete and Manage Personal Site, now just click on Edit link to start editing the user profile. 5.Now a detailed screen will be opened for you where you can edit any of the properties among several properties which are there.You can associate work phone,title,office,department, email and many other attributes to the selected user which we are editing. 6.After making all your changes, just click on the Save and Close button at the top of the Information to save your changes. And that’s all what you need to change the user’s profile, this is one of the method to reach here there can of course be other ways to reach at the same section, i would love to know about some other ways by which you people are manipulating the user profiles. Happy Programming!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The SQL Server 2005 Express Tools are installed. To continue, remove the SQL Server 2005 Express Tools. If you are getting the above error while installing Sql Server Management Studio 2008 then probably you might try the below given solutions one by one to fix this error. I m not certain what will work for you but i have added all the options which i found after spending some time on the net which various people have given and for me the most common one worked which also i have listed below.
Once Sql server Management Studio is installed successfully, then restart your system sql server installation will automatically ask you for a restart. After restarting you will see that your sql server 2005 instance will stop working because you played with the 90 directory and if you try to rename old to 90 then the system will not allow you to do so as it already created an entry name 90 for you having “Tools” and “Shell”. So now we are in deep trouble what to do next, what i did was i again renamed the 90 entry which it created to 70 and the entry for sql server 2005 which we renamed as old, again back to 90 and voila everything works fine now. Both sql server installations are running side by side and both management studios are also running side by side anyways we can open old database in SSMS 2008 so there is no need to have SSMS 2005 unless and until there is some special requirement. This was the hit and trial method and it worked for me for the first time but i would not suggest this method to be done on any full fledged install although you may test this on your virtual pc or vmware installation as it might corrupt your sql server 2005 installation in some cases. 2.Try uninstalling any redgate products if you have installed any especially Red Gate Sql Prompt, this also caused issues to some users. 3.Try uninstalling sql server Management Studio 2005 before installing SSMS 2008 Above listed three ways will do the task for you, if you have resolved the problem in some other easy and concrete way then please do post your comment. Happy Programming!!!!!!!!!!!!!!
Many times there are situations when you have to rename a MOSS installation either in your virtual PC environment and also sometimes in production, although the production one is little uncommon but the point is a sharepoint developer at one point or other want’s to rename his sharepoint server. Renaming the server simply will screw up all the settings inside the sharepoint as many places there are hardcoded references to the previous server which has to be remapped in order to run the MOSS server with the new server name. Here in this article i will explain you the step by step process for renaming the MOSS server.There are few resources available on the net which helps you in achieving the same but it was hard for me to find a good resource, so i thought to pen it down so that it can help everyone using Sharepoint. Steps:-
1.Change Alternate Access Mappings This is the first and foremost step to rename the Sharepoint server.Alternate access mappings can be found at Central Administration>Operations>Alternate Access Mappings Click on the web application url and edit the url to have the new server name.This you have to do manually for every website. 2.Run stsadm for renaming the server. You have to rename the server using stsadm before actually or physically renaming the sharepoint server. The command to rename the server is “stsadm –o renameserver –newservername “[yournewservername]” -oldservername “[youroldservername]“ ” and this is also shown in the figure below:- stsadm can be found in “C:ProgramFilesCommon FilesMicrosoft Sharedweb server extensions12bin Developers can set the path to be globally accessible for ease of using stsadm instead of navigating to the whole path.How to configure environment variables in order to get the stsadm available globally can be found here :- http://localhost/smallworkarounds/index.php/2009/07/19/sharepoint-quick-tip-add-stsadmexe-to/ 3.Rename the server physically in the windows explorer For this step just right click on the My Computer icon in the start menu and click on properties then on the Computer Name tab just click Change button and rename it to whatever new name you want to give to your sharepoint server installation. 4.Reboot the server After following all the 3 steps mentioned above just reboot your sharepoint server. 5.Update Login Credentials Updating credentials is must as sharepoint server is still mapped to the old username inside the domain and will thus cause problems.To update credentials we will again use stsadm.exe “stsadm –o updatefarmcredentials –userlogin “newservernameusername” –password “yourpassword” 6.Restart IIS IIS needs to be restarted in order to reflect the changes which we have just made in the above steps. Remember to restart the IIS using iisreset/noforce from the command prompt. 7.Changing Identity references in IIS After doing all these changes still sharepoint website’s application pools are mapped to the old username and servername which were used to install the Sharepoint inside the farm.So in order to get rid of this old server name we have to manually change the Identity references in the IIS. Remember if the identity says “Predefined” and the value is set to Network Service then there is no need to play and touch those settings, let them be like that only. But if the Identity is configurable then you have to replace the old servername with the new servername in the username section and if you want to change the password then you have to type the password and retype it to confirm and press ok After this step almost everything is done you just have to configure search index to function properly. 8.Reconfigure Search Index After renaming the sharepoint server the search index have to be reconfigured the best possible solution is to drop the search index and rebuild it.
After doing all these changes you may still find at some places where few links are referencing your old server name and clicking those links does nothing more then giving a blank page to user saying nothing exists on the server like that which he is asking for. In such scenarios you have to use your hit and trial method and have to find the root element which is causing this trouble and definitely that would be configurable just you have to figure out which is the right spot to configure this. After doing this you might face problems with MySite which can be fixed once editing the People & Groups section of the MySite administration. At last you can navigate through various pages to check that whether your MOSS 2007 server is working or not. Disclaimer :- This article is based on my testing under my virtual environment things may vary and i advice not to test and play with your production farm sharepoint installations as this might damage your sharepoint server. Happy Programming !!!!!!!!!!!!!!!!!!